When heat pump problems strike, it can be worrying. Especially in the winter season when you need it most.
Though these problems can arise at any time, it’s best to catch them sooner than later. If left too long, heat pump system problems can become much more severe.
For a low-cost repair, you’ll want to be sure that you know how to troubleshoot heat pump problems yourself. Then you can call professional repair services to get the job done right away.
Ready to learn how to troubleshoot problems with your heat pump system? Keep reading and we’ll walk you through it.
Know the Big Two
There are two troubleshooting tips that every homeowner should know when it comes to heat pump problems.
Often, breaker switches are the culprit. They can trip, which causes the pump to stop working.
When troubleshooting, checking the breaker switches should always be at the top of your list. It’s easy to fix, and when you turn them back on, your heat pump system should start to work again.
Another tip to keep in mind is that you should always check up on emergency switches. Like breaker switches, these can sometimes cause issues with the system.
Troubleshooting Other Heat Pump Problems
Keeping the two tips we’ve already discussed in mind, sometimes they aren’t the problem at all. One example could be when your heat pump is not blowing hot air as it should.
This calls for some troubleshooting to find out what the issue might be.
The first step, in this case, is to check up on the thermostat. Though it may sound like a silly problem, sometimes the thermostat can be set wrong. If you can verify that the thermostat is set correctly and that it isn’t the problem, more troubleshooting is in store.
Next, you should move to the outdoor unit. Sometimes, build-up and debris can block the outdoor unit which also stops it from doing its job. Being another easy fix, all that it takes is to clean around the unit to ensure that it can do its job.
If you check the unit and nothing is obstructing it, or if you clean it with no change to its performance, this is likely not your issue.
Calling a professional repair service will be your best option. They’ll be able to diagnose and make the appropriate repairs to the system.
Troubleshooting Fan Issues
Another common issue to find with your heat pump is fan issues. This is another problem that requires a check of the breaker system in case it has tripped. If it has, then you’ll want to push the switch back on.
When you do this, be sure that the fan runs for a little while without tripping it again. If it doesn’t there may be a bigger issue.
If everything looks good inside of the breaker you can move on.
The motor behind the fan could also be causing trouble. This is not something that you should work on as it’s best to leave it to a licensed HVAC technician.
Are You Having Heat Pump Problems?
A cold home is worrying, but knowing the golden rules of troubleshooting heat pump problems will give you peace of mind. Always remember to call a professional HVAC technician if you notice an issue that is deeper than the surface level.
Are you looking for help to fix your heat pump problems in Franklin, TN? If so, give us a call at Sewell Electric & HVAC today!
